Skip to content

DIY 900TX

Setup-Banner

Flashing via USB/UART (ESP32)

  • Targets:
    • DIY_900_TX_ESP32_SX127x_E19_via_UART
    • DIY_900_TX_ESP32_SX127x_RFM95_via_UART

Plug the ESP32 of the DIY TX into the USB of your computer. Then select the correct target given the RF chip you chose and press Build & Flash. Further updates can be performed by building and flashing the .bin file to the external module using OpenTX.

Flashing via USB/UART (TTGo)

  • Targets:
    • DIY_900_TX_TTGO_V1_SX127x_via_UART
    • DIY_900_TX_TTGO_V2_SX127x_via_UART

Plug the TTGo into the USB of your computer. Then select the correct target given the version you have and press Build & Flash. Further updates can be performed by building and flashing the .bin file to the external module using OpenTX.